 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| M4T28-BR12SH M4T32-BR12SH TIMEKEEPER(R) SNAPHAT(R) (BATTERY & CRYSTAL) FEATURES SUMMARY s PROVIDES BATTERY BACKUP POWER FOR NON-VOLATILE TIMEKEEPER (R) and SUPERVISOR DEVICES IN THE 28- OR 44PIN SNAPHAT SOIC PACKAGE s Figure 1. SNAPHAT Top Package REMOVABLE BATTERY AVOIDS HEAT ASSOCIATED WITH SURFACE MOUNT PROCESS SNAPS DIRECTLY ONTO SURFACEMOUNTED SNAPHAT SOIC CHOICE OF BATTERY CAPACITIES: - M4T28-BR12SH = 48mAh - M4T32-BR12SH = 120mAh SNAPHAT (SH) Battery/Crystal s s s KEYED INSERTION TO INSURE PROPER ASSEMBLY REMOVABLE FOR REPLACEMENT and PROPER DISPOSAL Pb-FREE PACKAGE AVAILABLE IN TUBES OR TAPE & REEL s s s March 2003 Rev. 2.5 1/12 M4T28-BR12SH, M4T32-BR12SH TABLE OF CONTENTS SUMMARY DESCRIPTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Logic Diagram (Figure 2.) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Signal Names (Table 1.) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 MAXIMUM RATING. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Absolute Maximum Ratings (Table 2.) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 DC AND AC PARAMETERS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Operating and AC Measurement Conditions (Table 3.) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 MECHANICAL INFORMATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 SNAPHAT Insertion/Extraction Forces (Figure 3.) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Battery Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 UL Recognition . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Battery Life . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 General Notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Battery Discharge Rates (Figure 4.) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 DIP Extractor Tool (Figure 5.) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 PART NUMBERING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 PACKAGE MECHANICAL INFORMATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 REVISION HISTORY. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 2/12 M4T28-BR12SH, M4T32-BR12SH SUMMARY DESCRIPTION The M4TXX-BR12SH SNAPHAT(R) top is a detachable lithium power source for ST's non-volatile TIMEKEEPER(R) surface-mount SOIC (MH) package (28- and 44-pin). The SNAPHAT top contains both the battery and crystal and is designed to be "snapped on" after the SOIC is surface mounted on the PC board. Thus the two piece solution prevents the battery and crystal from being exposed to the high temperatures of the surface mount process. Figure 2. Logic Diagram Table 1. Signal Names X1 X2 Crystal Input Crystal Output Negative Voltage Positive Voltage X1 X2 VBAT- VBAT+ SNAPHAT VBAT- VBAT+ AI02528 3/12 M4T28-BR12SH, M4T32-BR12SH MAXIMUM RATING Stressing the device above the rating listed in the "Absolute Maximum Ratings" table may cause permanent damage to the device. These are stress ratings only and operation of the device at these or any other conditions above those indicated in the Operating sections of this specification is Table 2. Absolute Maximum Ratings Symbol TA TSTG Parameter Grade 1 Ambient Operating Temperature Storage Temperature (VCC Off, Oscillator Off) Grade 6(1) Value 0 to 70 -40 to 85 -40 to 85 Unit C C C not implied. Exposure to Absolute Maximum Rating conditions for extended periods may affect device reliability. Refer also to the STMicroelectronics SURE Program and other relevant quality documents. Note: 1. Only the M4T32-BR12SH is available in Industrial temperature (Grade 6). CAUTION: Do NOT wave solder SOIC to avoid damaging SNAPHAT sockets. DC AND AC PARAMETERS This section summarizes the operating and measurement conditions, as well as the DC and AC characteristics of the device. The parameters in the following DC and AC Characteristic tables are derived from tests performed under the Measure- ment Conditions listed in the relevant tables. Designers should check that the operating conditions in their projects match the measurement conditions when using the quoted parameters. Table 3. Operating and AC Measurement Conditions Parameter Nominal Battery Voltage (VCC) Nominal Battery Capacity Battery Chemistry Crystal Load Capacitance (CL) Nominal Crystal Frequency Crystal Accuracy (@ 25C) M4T28-BR12SH 2.8 48 Li(CF) 12.5 32.768 35 M4T32-BR12SH 2.8 120 Li(CF) 12.5 32.768 35 pF kHz ppm Unit V mAh 4/12 M4T28-BR12SH, M4T32-BR12SH MECHANICAL INFORMATION Electrical connection to the SOIC is made through four pins that connect to the four press fitted sockets at each end of the SOIC. Critical contact points between the pins and sockets are gold-plated to resist oxidation. Internally, each socket contains six independent contact fingers to form redundant connections between the two components. These sockets were designed with high point contact force to provide the lowest possible contact resistance. The SNAPHAT(R) top also incorporates four molded-in retaining clips which hold onto the ends of the SOIC insuring mechanical and electrical connection even under severe mechanical shock and vibration. The combined SOIC and SNAPHAT Figure 3. SNAPHAT Insertion/Extraction Forces 15 assembly can sustain shock levels in excess of 100 g without separating. This package also passes variable frequency testing in accordance with MIL-STD-883, method 2007.2, condition A. Figure 3 illustrates the affect of repeated insertion and extraction of the SNAPHAT top to the SOIC. The force required to extract the SNAPHAT, and then to re-insert it, reduces each time. After four or five extractions, the reduction starts to become unnoticeable and the force required remains at a fairly constant figure. Typically, though, the SNAPHAT will only need to be extracted and reinserted once in its lifetime. 12.5 Average Insertion Average Extraction 10 Force (pounds) 7.5 5 2.5 0 1 2 3 4 5 6 7 8 9 10 AI02526 Number of Extractions 5/12 M4T28-BR12SH, M4T32-BR12SH Battery Characteristics Figure 4, page 7 illustrates the lithium coin cell discharge rate for a given load. This demonstrates the characteristically flat voltage level supplied by the battery until very near the end of its life. These discharge levels have been greatly accelerated in comparison to the normal, actual usage. Note: These batteries contain no Mercury (Hg), Cadmium (Cd), or Lead (Pb). UL Recognition The M4Txx-BR12SH has been recognized by Underwriters Laboratories under their Component Recognition Program and carries U.L. File Number E89556. Battery Life For information on Data Retention Life and Battery Storage Life, please refer to the Application Note AN1012. General Notes ST has conducted experiments using a manual press which determined that if approximately 60 pounds of force is applied to the top of the SNAPHAT(R), battery damage and/or die cracks could be induced. As Figure 3, page 5 specifies, only an average of less than 13 force-pounds is required for proper insertion. We recommend that no more than 40 pounds of force be applied during SNAPHAT insertion. If a manual press in employed, it is very important that it be calibrated such that it cannot exceed this limit. To remove the SNAPHAT top for replacement, a DIP/IC extractor tool should be used (see Figure 5). The SNAPHAP top should be grabbed by the narrow end to avoid bending the pins. Caution: To avoid draining battery do NOT place SNAPHAT pins into conductive foam. Caution: To avoid damaging SNAPHAT sockets do NOT wave solder SOIC. For battery disposal information, see on the web at www.rayovac.com. 6/12 M4T28-BR12SH, M4T32-BR12SH Figure 4. Battery Discharge Rates LOAD CHARACTERISTICS Temp: 20C 3.5 3.0 Voltage (V) 2.5 2.0 1.5 1.0 0 200 400 600 800 1000 1200 1400 1600 1800 2000 Duration (hrs.) (A) 15k 30k 100k BR1225 3.5 3.0 LOAD CHARACTERISTICS Temp: 20C Voltage (V) 2.5 2.0 1.5 1.0 0 1000 2000 3000 4000 5000 6000 15k 30k 50k 100k BR1632 Duration (hrs.) (B) AI02519 Figure 5. DIP Extractor Tool AI02527 7/12 M4T28-BR12SH, M4T32-BR12SH PART NUMBERING Table 4. Ordering Information Scheme Example: M4T 28-BR12 SH 1 TR Device Type M4T Battery Voltage and Capacity 28-BR12 = BR1225, 3V, 48mAh 32-BR12 = BR1632, 3V, 120mAh Package SH = SNAPHAT(R) Temperature Range 1 = 0 to 70C 6 = -40 to 85C (M4T32-BR12SH only) Shipping Method blank = Tubes TR = Tape & Reel For a list of available options (e.g., Speed, Package) or for further information on any aspect of this device, please contact the ST Sales Office nearest to you. 8/12 M4T28-BR12SH, M4T32-BR12SH PACKAGE MECHANICAL INFORMATION Figure 6. SH - 4-pin SNAPHAT Housing for 48mAh Battery & Crystal, Package Outline A1 A2 A A3 eA D B eB L E SHTK-A Note: Drawing is not to scale. Table 5. SH - 4-pin SNAPHAT Housing for 48mAh Battery & Crystal, Package Mechanical Data mm Symb Typ A A1 A2 A3 B D E eA eB L 0.46 21.21 14.22 15.55 3.20 2.03 6.73 6.48 Min Max 9.78 7.24 6.99 0.38 0.56 21.84 14.99 15.95 3.61 2.29 0.018 0.835 0.560 0.612 0.126 0.080 0.265 0.255 Typ Min Max 0.385 0.285 0.275 0.015 0.022 0.860 0.590 0.628 0.142 0.090 inches 9/12 M4T28-BR12SH, M4T32-BR12SH Figure 7. SH - 4-pin SNAPHAT Housing for 120mAh Battery & Crystal, Package Outline A1 A2 A A3 eA D B eB L E SHTK-A Note: Drawing is not to scale. Table 6. SH - 4-pin SNAPHAT Housing for 120mAh Battery & Crystal, Package Mechanical Data mm Symb Typ A A1 A2 A3 B D E eA eB L 0.46 21.21 17.27 15.55 3.20 2.03 8.00 7.24 Min Max 10.54 8.51 8.00 0.38 0.56 21.84 18.03 15.95 3.61 2.29 0.018 0.835 0.680 0.612 0.126 0.080 0.315 0.285 Typ Min Max 0.415 0.335 0.315 0.015 0.022 0.860 0.710 0.628 0.142 0.090 inches 10/12 M4T28-BR12SH, M4T32-BR12SH REVISION HISTORY Table 7. Document Revision History Date November 1999 01-Mar-01 04-Jun-01 10-Jul-01 21-Jan-02 20-Aug-02 14-Mar-03 Rev. # 1.0 2.0 2.1 2.2 2.3 2.4 2.5 First Issue Reformatted Basic textual changes from reformatting activity Changes references to "SUPERVISOR" from "Controller;" clarify temperature characteristics Change to include Crystal Accuracy (Table 3); add text for SNAPHAT insertion force tolerance and battery characteristics note Updated Insertion/Extraction Data (Figure 3) Add Pb-free note on page 1 Revision Details 11/12 M4T28-BR12SH, M4T32-BR12SH Information furnished is believed to be accurate and reliable. However, STMicroelectronics assumes no responsibility for the consequences of use of such information nor for any infringement of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of STMicroelectronics. Specifications mentioned in this publication are subject to change without notice. This publication supersedes and replaces all information previously supplied. STMicroelectronics products are not authorized for use as critical components in life support devices or systems without express written approval of STMicroelectronics. The ST logo is registered trademark of STMicroelectronics All other names are the property of their respective owners. (c) 2003 STMicroelectronics - All Rights Reserved STMicroelectronics GROUP OF COMPANIES Australia - Brazil - Canada - China - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan - Malaysia Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - U.S.A. www.st.com 12/12 |
Price & Availability of M4T28-BR12SH1TR
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |